Splitter Valve Kits

Gearbox splitter and range change valve repair kits. 22 ManuMark splitter valve kits are listed below, including MM33048, MM33048/1, MM33061. Makes covered include WABCO, Knorr, Scania, MAN, DAF.

Splitter Valve Kits components manufactured by Pitchline Engineering for ManuMark

Splitter Valve Kits

Splitter valves shift the range in a heavy gearbox. When the seals go, shifts get slow or drop out under load. Our kits carry the pistons, seals and O-rings for the common splitter and range change valves.

Makes covered in this section

WABCO, Knorr, Scania, MAN, DAF

  • 22 listed kits and components in this category
  • Rubber parts moulded in-house in nitrile, EPDM, Viton or silicone to suit the fluid
  • Pistons, shafts and adaptors machined on our own CNC lathes and mills
  • Held in stock for ManuMark under JIT flexible manufacturing

Splitter Valve Kits part list

Quote the ManuMark (MM) part number when you enquire. The catalogue carries the original valve numbers and alternate part numbers for each line.

Part no.ProductReferencesCatalogue page
MM33048KNORR Splitter (Minor, No Shaft)VALVE No. SV 3368 Alternate Part Numbers KNORR : SP 705109
MM33048/1KNORR Splitter (Major with Shaft)VALVE No. SV 3368109
MM33061KNORR Splitter (No Shaft)VALVE No.109
MM33061/1KNORR Splitter (with Shaft)—109
MM33071Splitter ValveVALVE No. SV 3361 RL 1705 XA 2 of each ITEM Includes O-Rings110
MM33072KNORR Splitter Valve (Major with Shaft)VALVE No. SV 3370110
MM33073KNORR Splitter ValveAlternate Part Numbers SV 3367110
MM33074WABCO POWERLINER Exh. SplitterVALVE No. 463013/012 Alternate Part Numbers WABCO : 465 013 2000110
MM33075KNORR Splitter ValveVALVE No. SV 3371111
MM33085WABCO Splitter Valve—111
MM33088WABCO Splitter ValveVALVE No. 463 063 000 2111
MM33114WABCO Splitter ValveVALVE No. 463 046 014 6111
MM33127MERC ZF Gearbox SplitterAIR Only Includes O-Rings112
MM33127/1ZF Gearbox Splitter HousingPOT Size Inside Diameter - 90mm112
MM33129Splitter Valve Repair KITKIT No. K 1699 EATON FULLER A5000 Original Includes O-Rings112
MM33129/1Splitter Valve Ring KITKIT No. K 1450 Includes O-Rings112
MM33145KNORR BREMSE 2 Pin Splitter ValveVALVE No. A 002260 3057 ACTROS AXOR VIELMETTER 12/90 33V1 0350 2 of each ITEM Includes O-Rings113
MM33150SCANIA Splitter ValveVALVE No. Includes O-Ring113
MM33156MAN ZF Gearbox Splitter Housing F2000POT Size Inside Diameter – 90mm For SEAL see MM33156/1113
MM33156/1Seal KIT for MM33156MAN F2000 DAF113
MM33172MAN Gearbox Splitter HousingZF PART No. H 1315 POT Size Inside Diameter – 90mm Use KIT MM33156/1114
MM33197DAF Gearbox Control ValveWABCO : 463 022 0200114

Other air brake repair kit categories

Air Dryer Repair Kits

Air dryer kits, adaptors and pistons for WABCO, KNORR and BOSCH air dryers.

Airmaster Repair Kits

Airmaster and air-over-hydraulic booster kits, pistons and shafts.

Brake Servo & Air Pack Kits

Repair kits for brake servos and air pack assemblies.

Calliper Repair Kits

Calliper seal and boot kits for air disc brakes across the major makes.

Calliper Pistons

Machined replacement calliper pistons for air disc brakes.

Circuit Protection Valve Kits

Four-circuit and multi-circuit protection valve repair kits.

Clutch Servo Repair Kits

The largest section in the range: clutch servo kits, pistons, master cylinders and shafts.

Compressor Repair Kits

Compressor gasket, valve plate and unloader components.

Foot Valve Repair Kits

Foot brake valve repair kits for single, dual and multi-circuit pedal valves.

Foot Valve Pistons

Replacement pistons and plungers for foot brake valves.

Governor Valve Kits

Governor valve repair kits controlling compressor cut-in and cut-out.

Hand Control Valve Kits

Hand brake and trailer hand control valve repair kits.

Hydromaster & Hydrovac Kits

Repair kits for Hydromaster and Hydrovac vacuum boosters.

Load Sensing Valve Kits

Load sensing and load apportioning valve repair kits.

Solenoid & Miscellaneous Kits

Solenoid valve kits and the smaller items that sit outside the main groups.

Pressure Converter Kits

Air-to-hydraulic pressure converter repair kits.

Quick Release Valve Kits

Quick release valve repair kits for faster brake release.

Relay Valve & Modulator Kits

Relay control valve and ABS modulator repair kits.

Slack Adjuster Kits

Automatic and manual slack adjuster repair components.

Cast Iron Sleeves

Cast iron replacement sleeves in a range of bore sizes and lengths.

Spring Brake & Actuator Kits

One of the biggest sections: spring brake, booster and actuator kits, shafts and caps.

Trailer Control Valve Kits

Trailer control and emergency valve kits, with and without dump.

Unloader Valve Kits

Unloader valve repair kits for compressor and air dryer unloaders.

Splitter Valve Kits questions

How many splitter valve kits are in the ManuMark range?

There are 22 listed items in this category, part of the current ManuMark air brake range. The full list with part numbers is on this page and in the downloadable catalogue.

Which makes do your splitter valve kits cover?

This category covers WABCO, Knorr, Scania, MAN, DAF units among others. The catalogue cross-references original valve numbers and alternate part numbers so you can match an unbranded valve.

What is in a splitter valve kit?

Kits contain the moulded rubber seals, diaphragms and O-rings for the unit, together with the machined or pressed hard parts listed against that part number in the catalogue. Some pistons and shafts are supplied separately, which the catalogue notes against each line.

Which rubber compound is used?

The compound is matched to the fluid: nitrile for air, EPDM for brake fluid, Viton for mineral oil and silicone for heat applications. All rubber components are moulded in our own rubber department in Pinetown.

Are they made in South Africa?

Yes. The machined and moulded components are produced at our own factory at 32 Henwood Road, Pinetown, KwaZulu-Natal, and marketed under the ManuMark brand.

How do I order the right part?

Send us the ManuMark part number from the list on this page (for example MM33048 or MM33048/1), or the number stamped on the valve, and we will confirm the correct splitter valve kit before you order.

Who should fit these kits?

Air brake repair kits should only be fitted by qualified technicians with the necessary skill and expertise to ensure the kit's proper and safe operation. ManuMark kits are manufactured for use with unmodified OEM valves only.

South Africa

Splitter Valve Kits supplied across South Africa

Manufactured at our own factory at 32 Henwood Road, Pinetown, KwaZulu-Natal. Choose your province to explore the cities and industrial areas we cover.