Airmaster Repair Kits

Airmaster and air-over-hydraulic booster kits, pistons and shafts. 23 ManuMark airmaster repair kits are listed below, including MM33012, MM33021, MM33027. Makes covered include Hino, Isuzu, Toyota.

Airmaster Repair Kits components manufactured by Pitchline Engineering for ManuMark

Airmaster Repair Kits

Airmasters convert air pressure into hydraulic braking force. The kits cover the air piston seals, hydraulic cups, O-rings and shafts that wear with cycle count, so a leaking or slow-releasing airmaster can be rebuilt rather than replaced.

Makes covered in this section

Hino, Isuzu, Toyota

  • 23 listed kits and components in this category
  • Rubber parts moulded in-house in nitrile, EPDM, Viton or silicone to suit the fluid
  • Pistons, shafts and adaptors machined on our own CNC lathes and mills
  • Held in stock for ManuMark under JIT flexible manufacturing

Airmaster Repair Kits part list

Quote the ManuMark (MM) part number when you enquire. The catalogue carries the original valve numbers and alternate part numbers for each line.

Part no.ProductReferencesCatalogue page
MM33012Shaft = 13.0mm Piston = 115mm SingleSingle/Major 9323-01841 9323-0185 Related Piston 233-11501 (not included)9
MM33021Shaft = 13.0mm Single (Minor Kit)—9
MM33027Shaft = 13.0mm Piston = 115mm DoubleRelated Piston 233-11501 (not included)9
MM33014Shaft = 14.5mm Piston = 115mm SingleMajor 9323-3031 ISUZU / JCR Related Piston 233-11501 (not included)10
MM33020Shaft = 14.5mm Single (Minor Kit)—10
MM33015Shaft = 14.5mm Piston = 115mm DoubleDouble Piston Major 9323-1575 ISUZU / JCR10
MM33040Shaft = 16.0mm Piston = 138mmTOYOTA / DAF / FG Series / NISSAN Related Piston 234-11503 (not included) Relay Kit Included (normal piston) No Poppit & No Diaphragm Assembly See MM25026 for Poppit Assembly See MM1812 for 29mm Cylinder See MM1906 for HINO Bull Nose with Quick Release10
MM33040/1Shaft = 16.0mm Piston = 138mm (Modified)Airmaster contains NO quick release / relay valve Poppit Included Relay NOT Included11
MM33040/2Quick Release for MM33040/1—11
MM33016Shaft = 18.5mm Piston = 138mmRelated Piston 234-11510 (not included) Shaft = 18.5mm Piston = 138mm Hex Relay11
MM33013Airmaster — Shaft 18.5mm, Piston 138mm, Hex Relay—11
MM33013/1Airmaster — Shaft 18.5mm, Piston 138mm, Hex Relay—11
MM33013/2Diaphragm Assembly (138 x 18.5 Hex)—12
MM1379Airmaster Hydraulic Master Cylinder (26.7mm Bore)—12
MM1379/1Airmaster Hydraulic Master Cylinder (25.5mm Bore)—12
MM1812Airmaster Hydraulic Master Cylinder (25.5mm Bore)See MM33040 for Airmaster Kit12
MM25026Airmaster Poppit Valve AssemblyASSEMBLY POSITION13
MM33018Airmaster Relay Valve—13
MM33019Airmaster Relay Valve—13
MM33032ISUZU F8000 Shaft = 16.0mm Piston = 138mmShaft = 16.0mm Piston = 138mm HINO CH12 HINO 235-06570 HINO 44640-2900 ISUZU OEM 1-85576-1670 JCC 234-06521 J.K.C. – MM33032 NABCO 47250-225007 UNITE 234-0555/47800-39613
MM33032/1ISUZU F8000 Shaft = 16.0mm Piston = 115mmShaft = 16.0mm Piston = 115mm HINO CH12 HINO 235-06570 HINO 44640-2900 ISUZU OEM 1-85576-1670 JCC 234-06521 J.K.C. – MM33032 NABCO 47250-225007 UNITE 234-0555/47800-39614
MM33202Airmaster ISUZU FTR 800 16mm Shaft138mm Piston 1-47800-644 236-04159 Includes O-Rings & Oil Seals14
MM33213TOYOTA HINO 500 Airmaster236-02607 236-02645 4464-03291 # 9323-3811 Brake Fluid Shaft Size = Ø 12mm Pot Size = Ø 115mm14

Other air brake repair kit categories

Air Dryer Repair Kits

Air dryer kits, adaptors and pistons for WABCO, KNORR and BOSCH air dryers.

Brake Servo & Air Pack Kits

Repair kits for brake servos and air pack assemblies.

Calliper Repair Kits

Calliper seal and boot kits for air disc brakes across the major makes.

Calliper Pistons

Machined replacement calliper pistons for air disc brakes.

Circuit Protection Valve Kits

Four-circuit and multi-circuit protection valve repair kits.

Clutch Servo Repair Kits

The largest section in the range: clutch servo kits, pistons, master cylinders and shafts.

Compressor Repair Kits

Compressor gasket, valve plate and unloader components.

Foot Valve Repair Kits

Foot brake valve repair kits for single, dual and multi-circuit pedal valves.

Foot Valve Pistons

Replacement pistons and plungers for foot brake valves.

Governor Valve Kits

Governor valve repair kits controlling compressor cut-in and cut-out.

Hand Control Valve Kits

Hand brake and trailer hand control valve repair kits.

Hydromaster & Hydrovac Kits

Repair kits for Hydromaster and Hydrovac vacuum boosters.

Load Sensing Valve Kits

Load sensing and load apportioning valve repair kits.

Solenoid & Miscellaneous Kits

Solenoid valve kits and the smaller items that sit outside the main groups.

Pressure Converter Kits

Air-to-hydraulic pressure converter repair kits.

Quick Release Valve Kits

Quick release valve repair kits for faster brake release.

Relay Valve & Modulator Kits

Relay control valve and ABS modulator repair kits.

Slack Adjuster Kits

Automatic and manual slack adjuster repair components.

Cast Iron Sleeves

Cast iron replacement sleeves in a range of bore sizes and lengths.

Splitter Valve Kits

Gearbox splitter and range change valve repair kits.

Spring Brake & Actuator Kits

One of the biggest sections: spring brake, booster and actuator kits, shafts and caps.

Trailer Control Valve Kits

Trailer control and emergency valve kits, with and without dump.

Unloader Valve Kits

Unloader valve repair kits for compressor and air dryer unloaders.

Airmaster Repair Kits questions

How many airmaster repair kits are in the ManuMark range?

There are 23 listed items in this category, part of the current ManuMark air brake range. The full list with part numbers is on this page and in the downloadable catalogue.

Which makes do your airmaster repair kits cover?

This category covers Hino, Isuzu, Toyota units among others. The catalogue cross-references original valve numbers and alternate part numbers so you can match an unbranded valve.

What is in a airmaster repair kit?

Kits contain the moulded rubber seals, diaphragms and O-rings for the unit, together with the machined or pressed hard parts listed against that part number in the catalogue. Some pistons and shafts are supplied separately, which the catalogue notes against each line.

Which rubber compound is used?

The compound is matched to the fluid: nitrile for air, EPDM for brake fluid, Viton for mineral oil and silicone for heat applications. All rubber components are moulded in our own rubber department in Pinetown.

Are they made in South Africa?

Yes. The machined and moulded components are produced at our own factory at 32 Henwood Road, Pinetown, KwaZulu-Natal, and marketed under the ManuMark brand.

How do I order the right part?

Send us the ManuMark part number from the list on this page (for example MM33012 or MM33021), or the number stamped on the valve, and we will confirm the correct airmaster repair kit before you order.

Who should fit these kits?

Air brake repair kits should only be fitted by qualified technicians with the necessary skill and expertise to ensure the kit's proper and safe operation. ManuMark kits are manufactured for use with unmodified OEM valves only.

South Africa

Airmaster Repair Kits supplied across South Africa

Manufactured at our own factory at 32 Henwood Road, Pinetown, KwaZulu-Natal. Choose your province to explore the cities and industrial areas we cover.