Foot Valve Pistons

Replacement pistons and plungers for foot brake valves. 18 ManuMark foot valve pistons are listed below, including MM1482/1, MM1577, MM1579. Makes covered include WABCO, Hino, Nissan, Sanwa Seiki, Nabco.

Foot Valve Pistons components manufactured by Pitchline Engineering for ManuMark

Foot Valve Pistons

Where the piston or plunger in a foot valve is scored or worn out of round, a kit alone will not hold pressure. We machine replacement foot valve pistons in-house to the original dimensions.

Makes covered in this section

WABCO, Hino, Nissan, Sanwa Seiki, Nabco

  • 18 listed kits and components in this category
  • Rubber parts moulded in-house in nitrile, EPDM, Viton or silicone to suit the fluid
  • Pistons, shafts and adaptors machined on our own CNC lathes and mills
  • Held in stock for ManuMark under JIT flexible manufacturing

Foot Valve Pistons part list

Quote the ManuMark (MM) part number when you enquire. The catalogue carries the original valve numbers and alternate part numbers for each line.

Part no.ProductReferencesCatalogue page
MM1482/1Main Air Piston for HINO—66
MM1577Main Air Piston CK45 CK46Double O-Ring HINO TB 8 HINO Goes with KIT MM3315866
MM1579Main Air Piston for E7 Foot ValveGoes with KITS MM33010 MM33025 MM22451 MM22226 Single O-Ring Groove66
MM1579/1NISSAN Foot Valve PistonDouble O-Ring Goes with KIT MM3301066
MM1681Main Air Piston NISSAN Foot ValveNABCO MM3300967
MM1704Main Air Piston CK20 NISSAN Foot Valve—67
MM1721WABCO Foot Brake PistonVALVE No. 461 903 622 667
MM1851NABCO Foot Valve PistonFor KIT MM3300367
MM22226/3E6 Foot Valve Piston—68
MM22298/1Piston for MM22298—68
MM33003/1Air Piston for NISSAN Foot Valve—68
MM33004/1HINO Main Air PistonFor SANWA SEIKI TB468
MM33004/2HINO Foot Valve Piston—69
MM33004/3HINO Bottom Piston—69
MM33056/2Piston for MM33056/1—69
MM33069/1Main Air Piston for MM33069—69
MM33153/1Main Air Piston for MM33153—70
MM33174/1PISTON for MM33174—70

Other air brake repair kit categories

Air Dryer Repair Kits

Air dryer kits, adaptors and pistons for WABCO, KNORR and BOSCH air dryers.

Airmaster Repair Kits

Airmaster and air-over-hydraulic booster kits, pistons and shafts.

Brake Servo & Air Pack Kits

Repair kits for brake servos and air pack assemblies.

Calliper Repair Kits

Calliper seal and boot kits for air disc brakes across the major makes.

Calliper Pistons

Machined replacement calliper pistons for air disc brakes.

Circuit Protection Valve Kits

Four-circuit and multi-circuit protection valve repair kits.

Clutch Servo Repair Kits

The largest section in the range: clutch servo kits, pistons, master cylinders and shafts.

Compressor Repair Kits

Compressor gasket, valve plate and unloader components.

Foot Valve Repair Kits

Foot brake valve repair kits for single, dual and multi-circuit pedal valves.

Governor Valve Kits

Governor valve repair kits controlling compressor cut-in and cut-out.

Hand Control Valve Kits

Hand brake and trailer hand control valve repair kits.

Hydromaster & Hydrovac Kits

Repair kits for Hydromaster and Hydrovac vacuum boosters.

Load Sensing Valve Kits

Load sensing and load apportioning valve repair kits.

Solenoid & Miscellaneous Kits

Solenoid valve kits and the smaller items that sit outside the main groups.

Pressure Converter Kits

Air-to-hydraulic pressure converter repair kits.

Quick Release Valve Kits

Quick release valve repair kits for faster brake release.

Relay Valve & Modulator Kits

Relay control valve and ABS modulator repair kits.

Slack Adjuster Kits

Automatic and manual slack adjuster repair components.

Cast Iron Sleeves

Cast iron replacement sleeves in a range of bore sizes and lengths.

Splitter Valve Kits

Gearbox splitter and range change valve repair kits.

Spring Brake & Actuator Kits

One of the biggest sections: spring brake, booster and actuator kits, shafts and caps.

Trailer Control Valve Kits

Trailer control and emergency valve kits, with and without dump.

Unloader Valve Kits

Unloader valve repair kits for compressor and air dryer unloaders.

Foot Valve Pistons questions

How many foot valve pistons are in the ManuMark range?

There are 18 listed items in this category, part of the current ManuMark air brake range. The full list with part numbers is on this page and in the downloadable catalogue.

Which makes do your foot valve pistons cover?

This category covers WABCO, Hino, Nissan, Sanwa Seiki, Nabco units among others. The catalogue cross-references original valve numbers and alternate part numbers so you can match an unbranded valve.

What is in a foot valve pistons kit?

Kits contain the moulded rubber seals, diaphragms and O-rings for the unit, together with the machined or pressed hard parts listed against that part number in the catalogue. Some pistons and shafts are supplied separately, which the catalogue notes against each line.

Which rubber compound is used?

The compound is matched to the fluid: nitrile for air, EPDM for brake fluid, Viton for mineral oil and silicone for heat applications. All rubber components are moulded in our own rubber department in Pinetown.

Are they made in South Africa?

Yes. The machined and moulded components are produced at our own factory at 32 Henwood Road, Pinetown, KwaZulu-Natal, and marketed under the ManuMark brand.

How do I order the right part?

Send us the ManuMark part number from the list on this page (for example MM1482/1 or MM1577), or the number stamped on the valve, and we will confirm the correct foot valve piston before you order.

Who should fit these kits?

Air brake repair kits should only be fitted by qualified technicians with the necessary skill and expertise to ensure the kit's proper and safe operation. ManuMark kits are manufactured for use with unmodified OEM valves only.

South Africa

Foot Valve Pistons supplied across South Africa

Manufactured at our own factory at 32 Henwood Road, Pinetown, KwaZulu-Natal. Choose your province to explore the cities and industrial areas we cover.