Calliper Pistons

Machined replacement calliper pistons for air disc brakes. 19 ManuMark calliper pistons are listed below, including MM1975/1, MM2051, MM2058. Makes covered include Meritor.

Calliper Pistons components manufactured by Pitchline Engineering for ManuMark

Calliper Pistons

Pitted or corroded calliper pistons tear new seals within weeks. We machine replacement pistons on our own CNC lathes to the original diameter and finish, so a reseal lasts.

Makes covered in this section

Meritor

  • 19 listed kits and components in this category
  • Rubber parts moulded in-house in nitrile, EPDM, Viton or silicone to suit the fluid
  • Pistons, shafts and adaptors machined on our own CNC lathes and mills
  • Held in stock for ManuMark under JIT flexible manufacturing

Calliper Pistons part list

Quote the ManuMark (MM) part number when you enquire. The catalogue carries the original valve numbers and alternate part numbers for each line.

Part no.ProductReferencesCatalogue page
MM1975/1Calliper Main PistonDiameter = Ø 76.29 Length = 23.725
MM2051Calliper Inner PistonDiameter = Ø 38 Length = 3825
MM2058Calliper Main PistonDiameter = Ø 48.1 Length = 20.325
MM2061-4Calliper Inner PistonDiameter = Ø 57.9 Length = 4225
MM2781BELL Calliper PistonDiameter = Ø 85 Length = 45.5 KNOTT Calliper BELL B35D B40D For KIT see MM33095 & MM33095 Lean26
MM3045FURUKAWA PistonDiameter = Ø 74.8 Length = 39.2 Goes with MM66011/B26
MM33089/1Calliper Main PistonDiameter = Ø 76.1 Length = 48.7 BELL B30 BELL B25 (218439) For KIT see MM33089 or MM33089/B ROCKWELL 4 Pistons per Kit26
MM33095/1Calliper Main PistonDiameter = Ø 84.9 Length = 47.5 BELL CALLIPER For KIT see MM33095 or MM33095/B26
MM66006MERITOR Piston AssemblyDiameter = Ø 66.6 Length = 55.627
MM66010/1LIUGONG Calliper PistonDiameter = Ø 70 Length = 4027
MM3621Calliper PistonDiameter = Ø 66.7 Length = 54.9 See MM3621/1 for the Seal Kit27
MM3658Calliper PistonDiameter = Ø 66.9 Length = 4627
MM3830Calliper PistonDiameter = Ø 92 Length = 61.128
MM4025Calliper PistonDiameter = Ø 79.3 Length = 49.3 For KIT see MM66009 or MM66009B28
MM4095Calliper PistonDiameter = Ø 114.2 Length = 61.328
MM4159Calliper PistonDiameter = Ø 79.93 Length = 49.328
MM4167Calliper PistonDiameter = 72Ø x 60.3 x 40.4 78/74548E29
MM4168Calliper Piston – Liugong ZL50CXDiameter = 75 Ø x 47.5 Liugong ZL50CX Wheel Loader29
MM4168/1Calliper SEAL KIT (Brake Fluid)Calliper SEAL KIT (Brake Fluid) Luigong ZL50CX Wheel Loader ** ONE KIT DOES FOUR PISTONS **29

Other air brake repair kit categories

Air Dryer Repair Kits

Air dryer kits, adaptors and pistons for WABCO, KNORR and BOSCH air dryers.

Airmaster Repair Kits

Airmaster and air-over-hydraulic booster kits, pistons and shafts.

Brake Servo & Air Pack Kits

Repair kits for brake servos and air pack assemblies.

Calliper Repair Kits

Calliper seal and boot kits for air disc brakes across the major makes.

Circuit Protection Valve Kits

Four-circuit and multi-circuit protection valve repair kits.

Clutch Servo Repair Kits

The largest section in the range: clutch servo kits, pistons, master cylinders and shafts.

Compressor Repair Kits

Compressor gasket, valve plate and unloader components.

Foot Valve Repair Kits

Foot brake valve repair kits for single, dual and multi-circuit pedal valves.

Foot Valve Pistons

Replacement pistons and plungers for foot brake valves.

Governor Valve Kits

Governor valve repair kits controlling compressor cut-in and cut-out.

Hand Control Valve Kits

Hand brake and trailer hand control valve repair kits.

Hydromaster & Hydrovac Kits

Repair kits for Hydromaster and Hydrovac vacuum boosters.

Load Sensing Valve Kits

Load sensing and load apportioning valve repair kits.

Solenoid & Miscellaneous Kits

Solenoid valve kits and the smaller items that sit outside the main groups.

Pressure Converter Kits

Air-to-hydraulic pressure converter repair kits.

Quick Release Valve Kits

Quick release valve repair kits for faster brake release.

Relay Valve & Modulator Kits

Relay control valve and ABS modulator repair kits.

Slack Adjuster Kits

Automatic and manual slack adjuster repair components.

Cast Iron Sleeves

Cast iron replacement sleeves in a range of bore sizes and lengths.

Splitter Valve Kits

Gearbox splitter and range change valve repair kits.

Spring Brake & Actuator Kits

One of the biggest sections: spring brake, booster and actuator kits, shafts and caps.

Trailer Control Valve Kits

Trailer control and emergency valve kits, with and without dump.

Unloader Valve Kits

Unloader valve repair kits for compressor and air dryer unloaders.

Calliper Pistons questions

How many calliper pistons are in the ManuMark range?

There are 19 listed items in this category, part of the current ManuMark air brake range. The full list with part numbers is on this page and in the downloadable catalogue.

Which makes do your calliper pistons cover?

This category covers Meritor units among others. The catalogue cross-references original valve numbers and alternate part numbers so you can match an unbranded valve.

What is in a calliper pistons kit?

Kits contain the moulded rubber seals, diaphragms and O-rings for the unit, together with the machined or pressed hard parts listed against that part number in the catalogue. Some pistons and shafts are supplied separately, which the catalogue notes against each line.

Which rubber compound is used?

The compound is matched to the fluid: nitrile for air, EPDM for brake fluid, Viton for mineral oil and silicone for heat applications. All rubber components are moulded in our own rubber department in Pinetown.

Are they made in South Africa?

Yes. The machined and moulded components are produced at our own factory at 32 Henwood Road, Pinetown, KwaZulu-Natal, and marketed under the ManuMark brand.

How do I order the right part?

Send us the ManuMark part number from the list on this page (for example MM1975/1 or MM2051), or the number stamped on the valve, and we will confirm the correct calliper piston before you order.

Who should fit these kits?

Air brake repair kits should only be fitted by qualified technicians with the necessary skill and expertise to ensure the kit's proper and safe operation. ManuMark kits are manufactured for use with unmodified OEM valves only.

South Africa

Calliper Pistons supplied across South Africa

Manufactured at our own factory at 32 Henwood Road, Pinetown, KwaZulu-Natal. Choose your province to explore the cities and industrial areas we cover.