Load Sensing Valve Kits

Load sensing and load apportioning valve repair kits. 7 ManuMark load sensing valve kits are listed below, including MM22397, MM33104, MM33105. Makes covered include WABCO, Knorr, Bosch.

Load Sensing Valve Kits components manufactured by Pitchline Engineering for ManuMark

Load Sensing Valve Kits

Load sensing valves reduce brake pressure to a lightly laden axle so it does not lock. Our kits restore the internal seals and O-rings so the valve apportions pressure correctly through the load range.

Makes covered in this section

WABCO, Knorr, Bosch

  • 7 listed kits and components in this category
  • Rubber parts moulded in-house in nitrile, EPDM, Viton or silicone to suit the fluid
  • Pistons, shafts and adaptors machined on our own CNC lathes and mills
  • Held in stock for ManuMark under JIT flexible manufacturing

Load Sensing Valve Kits part list

Quote the ManuMark (MM) part number when you enquire. The catalogue carries the original valve numbers and alternate part numbers for each line.

Part no.ProductReferencesCatalogue page
MM22397WABCO Relay Load SensingVALVE No. 475 710***0 Alternate Part Numbers WABCO : 475 710 001 2 A.S.A. : 5381 W/H : 633001-M Plastic Piston NOT included83
MM33104BOSCH Load Sensing ValveVALVE No. #1487010098000 0481 036 Single L/S – No Relay Includes O-Rings84
MM33105KNORR Load Sensing Valve – Major I87895VALVE No. BR 4411/12 BR 5611 – A/S Piston with O-Ring Includes O-Rings & Springs84
MM33105/1KNORR Load SensorVALVE No. BR 5503 A/S SEB00658 SEB22188 BR552284
MM33105/2KNORR Load Sensor (With Air Bags)VALVE No. BR 4351 BR 552284
MM33112WABCO Load Sensing (Air Suspension)VALVE KIT 475 711 0002 Includes Circlips, O-Rings & Springs85
MM33112/1WABCO Load Sensing (Air No Relay)VAVLE No. 475 714 5100 475 714 6222 Air Suspension NO Relay Trailer Use ONLY85

Other air brake repair kit categories

Air Dryer Repair Kits

Air dryer kits, adaptors and pistons for WABCO, KNORR and BOSCH air dryers.

Airmaster Repair Kits

Airmaster and air-over-hydraulic booster kits, pistons and shafts.

Brake Servo & Air Pack Kits

Repair kits for brake servos and air pack assemblies.

Calliper Repair Kits

Calliper seal and boot kits for air disc brakes across the major makes.

Calliper Pistons

Machined replacement calliper pistons for air disc brakes.

Circuit Protection Valve Kits

Four-circuit and multi-circuit protection valve repair kits.

Clutch Servo Repair Kits

The largest section in the range: clutch servo kits, pistons, master cylinders and shafts.

Compressor Repair Kits

Compressor gasket, valve plate and unloader components.

Foot Valve Repair Kits

Foot brake valve repair kits for single, dual and multi-circuit pedal valves.

Foot Valve Pistons

Replacement pistons and plungers for foot brake valves.

Governor Valve Kits

Governor valve repair kits controlling compressor cut-in and cut-out.

Hand Control Valve Kits

Hand brake and trailer hand control valve repair kits.

Hydromaster & Hydrovac Kits

Repair kits for Hydromaster and Hydrovac vacuum boosters.

Solenoid & Miscellaneous Kits

Solenoid valve kits and the smaller items that sit outside the main groups.

Pressure Converter Kits

Air-to-hydraulic pressure converter repair kits.

Quick Release Valve Kits

Quick release valve repair kits for faster brake release.

Relay Valve & Modulator Kits

Relay control valve and ABS modulator repair kits.

Slack Adjuster Kits

Automatic and manual slack adjuster repair components.

Cast Iron Sleeves

Cast iron replacement sleeves in a range of bore sizes and lengths.

Splitter Valve Kits

Gearbox splitter and range change valve repair kits.

Spring Brake & Actuator Kits

One of the biggest sections: spring brake, booster and actuator kits, shafts and caps.

Trailer Control Valve Kits

Trailer control and emergency valve kits, with and without dump.

Unloader Valve Kits

Unloader valve repair kits for compressor and air dryer unloaders.

Load Sensing Valve Kits questions

How many load sensing valve kits are in the ManuMark range?

There are 7 listed items in this category, part of the current ManuMark air brake range. The full list with part numbers is on this page and in the downloadable catalogue.

Which makes do your load sensing valve kits cover?

This category covers WABCO, Knorr, Bosch units among others. The catalogue cross-references original valve numbers and alternate part numbers so you can match an unbranded valve.

What is in a load sensing valve kit?

Kits contain the moulded rubber seals, diaphragms and O-rings for the unit, together with the machined or pressed hard parts listed against that part number in the catalogue. Some pistons and shafts are supplied separately, which the catalogue notes against each line.

Which rubber compound is used?

The compound is matched to the fluid: nitrile for air, EPDM for brake fluid, Viton for mineral oil and silicone for heat applications. All rubber components are moulded in our own rubber department in Pinetown.

Are they made in South Africa?

Yes. The machined and moulded components are produced at our own factory at 32 Henwood Road, Pinetown, KwaZulu-Natal, and marketed under the ManuMark brand.

How do I order the right part?

Send us the ManuMark part number from the list on this page (for example MM22397 or MM33104), or the number stamped on the valve, and we will confirm the correct load sensing valve kit before you order.

Who should fit these kits?

Air brake repair kits should only be fitted by qualified technicians with the necessary skill and expertise to ensure the kit's proper and safe operation. ManuMark kits are manufactured for use with unmodified OEM valves only.

South Africa

Load Sensing Valve Kits supplied across South Africa

Manufactured at our own factory at 32 Henwood Road, Pinetown, KwaZulu-Natal. Choose your province to explore the cities and industrial areas we cover.