Clutch Servo Repair Kits
The largest section in the range: clutch servo kits, pistons, master cylinders and shafts. 58 ManuMark clutch servo repair kits are listed below, including MM1199, MM1278, MM1278/1. Makes covered include WABCO, Knorr, Mercedes, Volvo, MAN.

Clutch Servo Repair Kits
Clutch servos take the weight out of a heavy clutch pedal. They fail through worn air piston seals, scored hydraulic bores and bent or worn shafts. This is the deepest part of the range, with kits, air pistons, hydraulic pistons, master cylinders, shafts and clips for European and Japanese servos in a wide spread of lengths.
Makes covered in this section
WABCO, Knorr, Mercedes, Volvo, MAN, Hino, Tata, Actros
- 58 listed kits and components in this category
- Rubber parts moulded in-house in nitrile, EPDM, Viton or silicone to suit the fluid
- Pistons, shafts and adaptors machined on our own CNC lathes and mills
- Held in stock for ManuMark under JIT flexible manufacturing
Clutch Servo Repair Kits part list
Quote the ManuMark (MM) part number when you enquire. The catalogue carries the original valve numbers and alternate part numbers for each line.
| Part no. | Product | References | Catalogue page |
|---|---|---|---|
| MM1199 | MERCEDES Clutch Servo Shaft | — | 37 |
| MM1278 | Clutch Servo Shaft (L = 132mm) | — | 37 |
| MM1278/1 | L = 132mm | — | 37 |
| MM1278/2 | L = 154mm | — | 37 |
| MM1317 | Japanese Clutch Servo Air Piston (90mm) | Complete with Shaft | 37 |
| MM1319 | Japanese Clutch Servo Air Piston (70mm) | Complete with Shaft | 37 |
| MM1364 | Japanese Clutch Servo Master Cylinder | 70mm & 90mm | 38 |
| MM1383 | Japanese Clutch Servo Hydraulic Piston | 1 x Seal Assembly Jig per order This KIT does NOT contain Seals | 38 |
| MM1430 | Clutch Shaft Plastic Clip | — | 38 |
| MM1537 | Clutch Servo Puch Rod (L = 135mm) | — | 38 |
| MM1537/1 | L = 150mm | — | 38 |
| MM1537/2 | L = 164mm | Boot for MM1537/2 see MM1964-1 | 38 |
| MM1720 | F90 Clutch Push Rod (L = 180mm) | For MM33062 | 39 |
| MM1850 | WABCO/MAN Plastic Piston for Clutch Servo | For MM33038/1 & MM1278 | 39 |
| MM1850/1 | WABCO F90 Plastic Piston for Clutch Servo | 970 051 1320 ACTROS / MAN For KIT see MM33062 | 39 |
| MM1964 | Boot for MM33038/1 & MM33062 | — | 39 |
| MM1964-1 | Boot for MM1537/2 Push Rod | — | 40 |
| MM2704 | 29MM Clutch Cylinder | L = 170mm | 40 |
| MM3052 | TATA Clutch Servo Master Cylinder | 105mm | 40 |
| MM22248 | WABCO Clutch Servo (21.5mm) | Old Generation VALVE No. 970 051 1130 Alternate Part Numbers WABCO : 970 051 002 2 W/H : 619023-M Break Fluid | 40 |
| MM22248/1 | WABCO Clutch Servo (16.3mm) | New Generation VALVE No. 970 051 131 0 Alternate Part Numbers WABCO : 970 051 903 2 W/H : 619024-M Break Fluid | 41 |
| MM22248/2 | Snap Sleeve | For MM22248 | 41 |
| MM22248/3 | Snap Sleeve | For MM22248 | 41 |
| MM22248/4 | MERCEDES Clutch Servo Air Piston | — | 41 |
| MM33022 | Japanese Clutch Servo – Aluminium | 90mm Alternate Part Numbers 9364-0393 A.S.A. 6560 W/H : 619002 See MM1383 for Piston | 42 |
| MM33022/1 | Japanese Clutch Servo – Cast Iron | 90mm Alternate Part Numbers 9364-0393 A.S.A. 6560 W/H : 619002 See MM1383 for Piston | 42 |
| MM33024 | Japanese Clutch Servo – Aluminium | 70mm Alternate Part Numbers 9364-0385 A.S.A. 5922 W/H : 619001 See MM1364 for Cylinder See MM1383 for Piston | 42 |
| MM33024/1 | Japanese Clutch Servo – Cast Iron | 70mm Alternate Part Numbers 9364-0385 A.S.A. 5922 W/H : 619001 See MM1364 for Cylinder See MM1383 for Piston | 42 |
| MM33038/1 | WABCO Clutch c/w Servo Sleeve | 970 051 111 0 MAN 970 051 114 0 HINO/FIAT 970 051 114 0 NISSAN/HINO 970 051 126 0 Alternate Part Numbers WABCO : 970 051 905 2 Plastic Piston – MM1850 WABCO : 970 051 904 2 Shaft – MM1278 A.S.A. 5738 & 5739 Main Piston 80mm | 43 |
| MM33053 | KNORR BREMSE Clutch Servo | VALVE No. VG : 3151 & 3156 Alternate Part Numbers KNORR : I 87912 I 87755/0051 Minor | 43 |
| MM33062 | WABCO Clutch Servo F90 Series (108mm) | VALVE No. 970 051 132 0 970 051 1630/40/50 970 051 1760 HINO 970 051 1790 ATEGO Alternate Part Numbers WABCO : 970 051 9112 WABCO : 970 051 9452 | 43 |
| MM33113 | KNORR BREMSE Clutch Servo 75mm Piston | Alternate Part Numbers VG : 3200 VG : 3204 VG : 3262 VG : 3267 I-84613 Includes O-Rings | 43 |
| MM33130 | WABCO Clutch Servo M.A.N. | KIT No. 462 012 002 2 VALVE No. 462 012 1010 Includes O-Rings Includes Circlips | 44 |
| MM33130/1 | WABCO Clutch Servo M.A.N. Additional | — | 44 |
| MM33130/2 | WABCO Clutch Servo M.A.N. | — | 44 |
| MM33130/3 | WABCO Clutch Servo M.A.N. Top Part | — | 44 |
| MM33133 | KNORR BREMSE Clutch Servo 100mm Piston | Alternate Part Numbers VG : 3208 VG : 3229 | 45 |
| MM33138 | MAN/ACTROS/HINO Clutch Servo | VALVE No. 970 051 307 0 970 051 414 0 ACTROS : 970 051 431 0 970 051 423 0 108mm Pot 370 051 424 0 HINO PROFIA 700 Cover Plates available MM33138/1 or MM33138/2 Includes O-Rings | 45 |
| MM33138/1 | ACTROS Clutch Servo Cover Plate | Plastic | 45 |
| MM33138/2 | MAN Clutch Servo Cover Plate | Plastic | 45 |
| MM33142 | RENAULT KERAX Clutch Servo | KIT No. 970 051 4150 970 051 9572 DONGFENG TRUCKS Includes O-Rings | 46 |
| MM33152 | KONGSBERG Clutch Servo 100mm | D.A.F. & VOLVO FUSO MITSUBISHI FV26-420 Includes O-Rings Includes U-Seals | 46 |
| MM33161 | TATA Clutch Servo 105mm | Japanese Unit Only ** Does NOT fit in TATA NOVUS ** Includes O-Rings | 46 |
| MM33161/1 | TATA NOVUS Double Diff Clutch Servo | For TATA NOVUS Only Includes O-Rings | 46 |
| MM33162 | WABCO Clutch Servo MAN | New Generation VALVE No. 970 051 406 0 970 051 435 0 For Cover Plate see MM33162/1 | 47 |
| MM33162 LEAN | WABCO Clutch Servo MAN (New Gen) | LEAN KIT For WABCO New Generation Clutch SERVO MAN VALVE No. 970 051 406 0 970 051 435 0 | 47 |
| MM33162/1 | MAN Clutch Servo Front Cover | Plastic 970 051 406 0 970 051 435 0 | 47 |
| MM33170 | KONGSBERG Clutch Servo for VOLVO | 100mm Plastic Seat VOLVO : 205245 84 629276 Includes O-Rings | 47 |
| MM33173 | NISSAN Clutch Servo UD440 – 8mm | 8mm Shaft 0064 2055 4087 Includes O-Rings | 48 |
| MM33173/1 | NISSAN Clutch Servo UD440 – 10mm | 10mm Shaft JKC Unit Includes O-Rings | 48 |
| MM33178 | WABCO Clutch Servo – Mineral Oil | VALVE No. 970 051 4120 MAN /ATEGO 970 051 441 0 AXOR | 48 |
| MM33181 | KNORR BREMSE Clutch Servo | VALVE No. VG : 3269 102mm Piston Large Seal | 48 |
| MM33187 | MAN TGA Clutch Servo (KNORR BREMSE) | VALVE No. Electronic 3031-AKB with SOLENOIDS | 49 |
| MM33188 | ACTROS Clutch Servo – IMPORTED (WABCO) | VALVE No. Electronic MAY 3021 GK | 49 |
| MM33193 | MAN TGM Clutch Servo (Mineral Oil) | VALVE No. Small Seal Ø 80mm Stepped Air Cylinder | 49 |
| MM33194 | Japanese Clutch Servo 70mm Long Stroke | Includes O-Rings | 49 |
| MM33195 | KONGSBERG Clutch Servo | SCANIA PART No. 1 513 717 KA 629683 619022-M Pot Size = 100mm | 50 |
| MM33206 | Japanese Clutch Servo J.K.C | FUSO 105mm NISSAN UD 390 | 50 |
Other air brake repair kit categories
Air Dryer Repair Kits
Air dryer kits, adaptors and pistons for WABCO, KNORR and BOSCH air dryers.
Airmaster Repair Kits
Airmaster and air-over-hydraulic booster kits, pistons and shafts.
Brake Servo & Air Pack Kits
Repair kits for brake servos and air pack assemblies.
Calliper Repair Kits
Calliper seal and boot kits for air disc brakes across the major makes.
Calliper Pistons
Machined replacement calliper pistons for air disc brakes.
Circuit Protection Valve Kits
Four-circuit and multi-circuit protection valve repair kits.
Compressor Repair Kits
Compressor gasket, valve plate and unloader components.
Foot Valve Repair Kits
Foot brake valve repair kits for single, dual and multi-circuit pedal valves.
Foot Valve Pistons
Replacement pistons and plungers for foot brake valves.
Governor Valve Kits
Governor valve repair kits controlling compressor cut-in and cut-out.
Hand Control Valve Kits
Hand brake and trailer hand control valve repair kits.
Hydromaster & Hydrovac Kits
Repair kits for Hydromaster and Hydrovac vacuum boosters.
Load Sensing Valve Kits
Load sensing and load apportioning valve repair kits.
Solenoid & Miscellaneous Kits
Solenoid valve kits and the smaller items that sit outside the main groups.
Pressure Converter Kits
Air-to-hydraulic pressure converter repair kits.
Quick Release Valve Kits
Quick release valve repair kits for faster brake release.
Relay Valve & Modulator Kits
Relay control valve and ABS modulator repair kits.
Slack Adjuster Kits
Automatic and manual slack adjuster repair components.
Cast Iron Sleeves
Cast iron replacement sleeves in a range of bore sizes and lengths.
Splitter Valve Kits
Gearbox splitter and range change valve repair kits.
Spring Brake & Actuator Kits
One of the biggest sections: spring brake, booster and actuator kits, shafts and caps.
Trailer Control Valve Kits
Trailer control and emergency valve kits, with and without dump.
Unloader Valve Kits
Unloader valve repair kits for compressor and air dryer unloaders.
Clutch Servo Repair Kits questions
How many clutch servo repair kits are in the ManuMark range?
There are 58 listed items in this category, part of the current ManuMark air brake range. The full list with part numbers is on this page and in the downloadable catalogue.
Which makes do your clutch servo repair kits cover?
This category covers WABCO, Knorr, Mercedes, Volvo, MAN, Hino, Tata, Actros units among others. The catalogue cross-references original valve numbers and alternate part numbers so you can match an unbranded valve.
What is in a clutch servo repair kit?
Kits contain the moulded rubber seals, diaphragms and O-rings for the unit, together with the machined or pressed hard parts listed against that part number in the catalogue. Some pistons and shafts are supplied separately, which the catalogue notes against each line.
Which rubber compound is used?
The compound is matched to the fluid: nitrile for air, EPDM for brake fluid, Viton for mineral oil and silicone for heat applications. All rubber components are moulded in our own rubber department in Pinetown.
Are they made in South Africa?
Yes. The machined and moulded components are produced at our own factory at 32 Henwood Road, Pinetown, KwaZulu-Natal, and marketed under the ManuMark brand.
How do I order the right part?
Send us the ManuMark part number from the list on this page (for example MM1199 or MM1278), or the number stamped on the valve, and we will confirm the correct clutch servo repair kit before you order.
Who should fit these kits?
Air brake repair kits should only be fitted by qualified technicians with the necessary skill and expertise to ensure the kit's proper and safe operation. ManuMark kits are manufactured for use with unmodified OEM valves only.
South Africa
Clutch Servo Repair Kits supplied across South Africa
Manufactured at our own factory at 32 Henwood Road, Pinetown, KwaZulu-Natal. Choose your province to explore the cities and industrial areas we cover.




